Can You Put Brembo Brakes on Any Car , Brembo brake caliper

Can You Put Brembo Brakes on Any Car

Brembo brakes have become a symbol of ultimate performance which are often seen on sports cars and supercars. But for those seeking to upgrade their own vehicle’s braking capabilities, a burning question remains: Can you put Brembo brakes on any car?

You can put Brembo brakes on any car with disc brakes. But there are a few factors you need to consider. The cost and changes required for your vehicle will differ significantly. On a few rare occasions, you might need to modify the wheels and suspension of the vehicle.

Here I will explain to you how I installed Brembo brakes on my car myself, as a step-by-step guide, and the factors you need to consider when installing Brembo brakes.

Brembo brake caliper fitted to brake disk

What Is the Difference Between Brembo and Normal Brakes?

Brembo BrakesNormal Brakes
QualityGenerally higher quality, especially in terms of performanceVaries depending on the brand and type
Brand AssociationKnown for performance and racing applicationsCommonly used in regular vehicles
Fit and FinishOften exhibit good fit and finish right out of the boxQuality may vary
AvailabilityCan be found in various auto parts stores and big box storesWidely available in the market
LongevityPerformance and longevity may vary depending on usage and maintenancePerformance and longevity may vary depending on usage and maintenance
PricingTends to be higher-priced compared to normal brakesThe price range varies based on brand and type
ApplicationPreferred for vehicles that require enhanced braking performanceSuitable for everyday commuter vehicles
WarrantyMay come with a warranty, depending on the specific productThe warranty varies based on brand and type
Customer SatisfactionGenerally well-regarded by enthusiasts and those seeking performance enhancementsMixed reviews based on individual experiences
Overall PerformanceOften provides superior braking performance and responsivenessPerformance may vary based on brand and type

How Did I Install Brembo Brakes in My Car?

Alright, get ready to upgrade your car’s braking system and experience the power of the SRT six-piston Brembos.

Step 1: Remove the Wheel

Once I removed the wheel, I grabbed a bucket and carefully unbolted the brake line connection using a 15-millimeter bolt.

Tip: Be sure to catch the draining brake fluid in the bucket. Avoid any contact with the car’s paintwork, as it can be quite corrosive.

Step 2: Unbolt the Caliper Bracket

I used a 5/8-inch 12-point socket and a half-inch breaker bar to tackle the challenging bolts. They were quite stubborn. So, a breaker bar provided the necessary leverage for removal.

Step 3: Remove the Caliper and Bracket

Once the bolts were out, the caliper and bracket came off together, leaving only the rotor behind. To remove the rotor, I located the little rubber ring and carefully pried it off with a screwdriver.

Tip: You may need to tap the rotor with a hammer to break it loose from any rust or corrosion. Remember to save the two bolts, as they will be used to secure the new caliper later on.

Brake disk

Step 4: Install the New Rotor

Now that the old rotor is out of the way, it’s time to install the new rotor. I gave it a quick spray of brake cleaner to remove any coatings. Then, I slid the rubber ring back into place, securing the rotor.

Step 5: Install the New Caliper

Moving on to the caliper, I made sure to remove the plug where the brake line would mount. Then, I slid the brake pads into position while paying attention to the orientation of the holes in the pads, making sure they were facing up.

I used the pins provided with the caliper to hold everything together. I slid the pins through one side and tapped them with a hammer until they were flush with the caliper. I placed the rattle clip over the pin. Then I pressed it down firmly. This ensured that everything in the caliper was held tightly in place.

Step 6: Bolt the Caliper Back On

It was time to bolt the caliper back onto the bracket. The new caliper comes with an integrated bracket. I utilized the same bolts that were used for the original brakes.

Congratulations! You’ve successfully installed the Brembo brakes in your car. Get ready to experience improved stopping power and a more aggressive look.

Note: If you’re not comfortable performing these steps yourself, it’s always recommended to seek professional assistance.

Can You Put Brembo Brakes on Any Car?

When it comes to Brembo brakes, their compatibility with different cars is influenced by several key factors that need careful consideration.

Physical Characteristics

Factors like wheel size, clearance, and suspension design all come into play. These factors determine whether the Brembo brake systems can be seamlessly integrated into your car’s existing setup. It’s essential to assess the specific Brembo brake model and its compatibility with your car’s braking system.

Regular use of the vehicle

Brembo brakes are renowned for their race-inspired technology and ability to handle high-performance driving demands. So, if your car is primarily used for daily commuting or light recreational driving, alternative brake options might be more suitable in terms of both performance and cost.

What Should I Do If I Can’t Install Brembo Brakes?

If you can’t install Brembo, don’t worry. There are still great alternatives, such as improved brake pads, rotors, or other aftermarket brake systems, that can still offer significant enhancements.


Why are Brembo brakes unique?

The Brembo brake system braked better in every situation and required shorter braking distances. Additionally, it performed far better than the factory brakes in terms of withstanding the test’s high stresses and the performance decline brought on by a rise in thermal load.

How often should Brembo brakes be changed?

When to change the brake pads and discs. We advise inspecting your brakes every 15,000 to 20,000 kilometers, but if the car exhibits vibrations, a check-up should be made right away.

How heated do Brembo brakes become?

Brembo brakes have recommended working temperatures below 200°C (392°F). The maximum acceptable working temperature for these brakes is 220°C (428°F).

Do Brembo brakes have a certain direction?

If you look closely at the caliper, you will notice a small arrow that indicates the direction in which the disc rotates. The consecutive piston diameters used by Brembo result in directional calipers. To prevent uneven wear of the brake pads, the front pistons have smaller diameters.


I hope you understand whether you can or cannot put Brembo brakes in your car. Remember, there are many ways that you can improve brake performance other than Brembo.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *